Top 10 Safety Tips For Scrollsaw Users

Scroll Saw Safety Are Scroll Saws Dangerous? in 2022 Scroll saw
Scroll Saw Safety Are Scroll Saws Dangerous? in 2022 Scroll saw from

Scrollsawing is an enjoyable hobby enjoyed by many people. It is also a very safe activity, if done with the proper precautions. Whether you’re a beginner or a seasoned woodworker, we’ve compiled a list of our top 10 safety tips for scrollsaw users to help you stay safe while you work.

1. Wear Safety Gear

Protective gear is a must for any woodworking project, and scrollsawing is no exception. Safety glasses should be worn to protect your eyes from flying debris, and hearing protection should be used to protect your ears from the loud noise of the saw. It’s also a good idea to wear a dust mask to keep from breathing in sawdust. Finally, consider wearing gloves to protect your hands from the sharp edges of the saw blade.

2. Sharpen Your Blades

Sharp blades are essential for making clean, accurate cuts. Dull blades can lead to messy cuts and potential kickback, which can be dangerous. When possible, use a sharpening jig to sharpen your blades. If you don’t have access to a jig, use a file or stone to sharpen the blade. Be sure to use the correct angle and technique when sharpening your blades.

3. Install the Blade Properly

When installing the blade, make sure to use the proper technique. First, make sure the teeth are facing the correct way and that the blade is secure in the saw. Make sure the blade is not too tight or too loose. If the blade is too loose, it won’t cut properly. If it’s too tight, it can cause kickback.

4. Use a Push Stick

Using a push stick is a great way to keep your hands away from the blade and to ensure an even cut. Make sure to use the proper push stick for the job, as there are several types available. A push stick should be used when making any cut that is too small or too close to the blade for your hands to reach.

5. Check the Material

Before cutting, make sure the material is free of any debris or nails. This will help to ensure a clean, accurate cut. If the material is too thick, consider using a jigsaw or band saw instead. Trying to force the material through the blade can cause kickback.

6. Secure Your Workpiece

It’s important to secure your workpiece before cutting. If the material is not secured, the blade can grab it and cause kickback. Use clamps to hold the material in place and be sure to use the proper amount of pressure to ensure a secure hold. You can also use a hold-down clamp to secure the material to the table.

7. Make Sure the Table Is Level

Before beginning any cutting, make sure the table is level. If the table is not level, the blade can grab the material and cause kickback. Use a level to check the table and adjust if necessary.

8. Be Prepared for Kickback

It’s important to be prepared for kickback in case it happens. Make sure you’re wearing the proper safety gear and that the blade is sharp and installed correctly. If the blade does catch, let go of the saw immediately and keep your hands away from the blade.

9. Don’t Rush

Take your time when working with a scroll saw. Rushing through a project can lead to sloppy cuts and potential kickback. Take your time and be sure to make clean, accurate cuts.

10. Know Your Saw

Make sure you’re familiar with the saw before using it. Read the manual and practice with scrap material before attempting to cut your workpiece. Knowing the saw and its capabilities will help you to make better cuts and avoid potential kickback.

Following these safety tips will help you stay safe while scroll sawing. Remember, safety comes first!

Leave a Reply

Your email address will not be published. Required fields are marked *